problem sa pregrijavanjem gusa
http://www.tomos-riders.com/tuning-projekti-i-tuning-pitanja/sta-mislite-vodeno-hladjenje/msg167014/#msg167014pucanje karike?
Koji su to glupi izgovori?
Znate nakopat kanale,a neznate napraviti plašt oko cilindra i premjestit spoj karike
(znam da se na utrkama ne smje koristiti vodenjara ali govorim za ove slobodne tjunere)
Because the direction of transfer flow is so very important in obtaining a high
power output and a good power range, only very experienced tuners should attempt to
modify the top section of transfer ports. If you don't know what you are doing, you
could easily render the cylinder useless. When the transfer duration is too short, raise
the barrel using an aluminium spacer of the required thickness, and fit a base gasket on
each side to ensure a good seal
Zato što je usmjerenost prelaznih kanala jako bitna u dobivanju velike snage i dobrog raspodjela snage,samo jako iskusni tuneri bi smjeli pokušati preraditi gornji dio prelaznih kanala. Ako neznate šta radite,lako možete uništiti cilindar nizašta.Ako je otvorenost prelivnih kanala premala,dignite cilindar koristeći aluminiski distancer potrebne debljine...
Two Stroke Performance Tuning Graham bell
